Tapflo is the official Europump Consulting partner in Georgia.

Get more information about our products and contact us:

Official partner website:


Products of Europump Consulting are presented by the following pumps:

vert_horiz multistage pumps-  Vertical / horizontal multistage pumps


submersible pumps- Submersible wastewater pumps


drainage pumps- Drainage and sludge pumps


Vertical multistage pumps

vertical multistageSB-series are professional  multistage pumps for industrial applications. Depending of the media, the pumps comes in three different material combinations; pump volute and flanges in cast iron and impellers in AISI304 (type SB), complete  pump and connections (flange or Victaulic) in stainless steel AISI304 (type SBI) and the fully stainless steel version in AISI316 (type SBN).

All material combinations can be equipped with an integrated variable speed drive and pump control to the motor (type SB(I/N)E.

The SB, SBI and SBN pumps are non-self-priming vertical multistage pump of in-line design, flange or with Victaulic coupling with equally sized suction and discharge ports. Stage construction with stainless steel impellers, chambers and pressure casing. Pump stub shaft and motor shaft of the IEC-standards motor are directly close coupled. All pumps are equipped with a cartridge type mechanical seal for easy maintenance.

 SB, SBI and SBN pumps have different pump sizes and various numbers of stages to provide the flow and the pressure required. 


  • Max pressure: 50 bar
  • Max capacity: 210 m3/h


  • Water supply and pressure boosting
  • Irrigation and agriculture
  • Irrigation and agriculture
  • Water treatment
  • Heating, ventilation and air-conditioning


Horizontal multistage pumps

We offer a wide range of state of the Horizontal multistage pumps, complete in stainless steel AISI304 or AISI316. 

СB series

CB pumps
The CB and CBI series are non-self priming, horizontal multistage centrifugal pumps. Pump is coupled with motor at the same shaft and mounted on a base-plate. The friendly design makes the pump suitable for installation in the small domestic or industrial water supply systems. The pump is fitted with a mechanical seal and through-going pump-motor shaft.


  • Max pressure: 7,5 bar
  • Max capacity: 16 m3/h

HB series

HB pumps
A horizontal, multistage centrifugal pump is made of stainless steel. The pump is a non-self priming type and fitted with a mechanical shaft seal. 


  • Max pressure: 7 bar
  • Max capacity: 15 m3/h


  • Domestic
  • Liquid transfer and circulation of liquids within light industry and farming
  • Pressure boosting
  • Air-conditioning systems
  • Cooling systems or cooling machine
  • Specialized OEM equipment

Submersible wastewater pumps


SP-series are a professional range of submersible well pumps in full stainless steel AISI304 or AISI316. It is used World Wide
by many accredited companies within water supply, groundwater control, wellpoints and drilling applications.

Our submersible motors are waterfilled and first class quality only. They are attached by NEMA flange standards to the pump and can easily retrofit other pumphead brands. 


  • Range: 3” – 10”
  • Max pressure: 60 bar
  • Max capacity: 220 m3/h



  • Vortex & Channel impellers
  • Submersible motors with/without cooling jacket
  • Motors from 0,5 - 50 kW
  • Capacities up to 300 l/sec.
  • Head to 85 meters
  • Solids pasing up to 135 mm
  • Standard Burgmann seals
  • Stainless lifting hook
  • Cast iron or stainless steel executions

Drainage & Sludge Pumps 



  • Sludge pumps suitable for waste water
  • Drainage pumps suitable for sand / abrasive liquids
  • Built-in vent valves enable permenent dry run
  • Hose connections via stortz or thread
  • Motor sizes from 0,3 to 60 kW
  • Capacities up to 300 l/sec.
  • Heads to 120 m
  • Solids passing up to 80 mm
  • Low weight
  • Accessories e.g. Firehose, couplings
  • Built-in level controls
  • Chemical industry

    Chemical industry The chemical industry is one of the biggest potential customers group of all mentioned. Chemical companies use a large number of pumps in their process. Diaphragm pumps are mainly used where portab...Read more»
  • Surface conditioning

    Surface conditioning Tapflo has served the surface treatment industry with pumps since more than 25 years. We have the knowledge of selecting the right pumps and filters for the different applications that are present ...Read more»
  • Paint, print & varnish industry

    Paint, print & varnish industry Tapflo has served the printing industry since 1985 with pumps and accessories for circulation, transfer, mixing and return, of ink, glue and solvents etc. We have the unique advantage of having our...Read more»
  • Hygienic application

    Hygienic application Transfer of food products like soup, cream, syrup, milk, yoghurt, flavours, spirit, chocolate, dough, creams, paste, perfumes and toothpaste. Service applications as spraying of cleaning liquid...Read more»
  • Water treatment

    Water treatment Pumping samples, dosing acids and alkalis for pH-control. Transfer of flocculent, suspensions, chemical reagents and sludges. The pumps are resistant to hydrochloric acid and ferric chlorite, plus ...Read more»
  • Pulp & paper industry

    Pulp & paper industry Transport of glue, sodium silicate, colour and titanium oxide etc. Bleaching products, sampling and waste water handling.Read more»
  • Mechanical industry

    Mechanical industry Handling of oil, fats, lubricants, cooling liquids, washing and cleaning liquids, solvents and waste products etc.Read more»
  • Biofuel

    Biofuel A biofuel is a fuel that contains energy from geologically recent carbon fixation. These fuels are produced from living organisms. Examples of this carbon fixation occur in plants and microalgae. T...Read more»

There are no products matching the selection.

  • × Your inquiry was submitted and will be responded to as soon as possible. Thank you for contacting us.
  • × Unable to submit your request. Please, try again later

Contact Us